Modification of La Spaziale S1 (Mini) Vivaldi II with timer, web interface, manual dose, power meter and printserver with airprint

Information

Due to requests from english users, this page will become the english translation of the german documentation: https://www.kaffeewiki.de/index.php?title=Umr%C3%BCsten_der_La_Spaziale_S1_%28Mini%29_Vivaldi_II_auf_Timer,_Webinterface,_manuellen_Bezug_und_Stromz%C3%A4hler

As a start this will be the transpation via google translate. Everybody is invited to improve this page and do a better translation.

Installation of a timer "Vivaldi myTimer" in the Vivaldi incl. WLAN / WiFi

In addition to the installation of further options will be described.

The following options are installed independent of the timer. But it is mostly so little additional effort, so it is advisable to implement this with, when the machine is open times.

Option 1: Switching automatic load / automatic reference

option 2: energy Meter

Option 3: Shot Timer incl shot administration

Option 4: automatic backflush

Option 5: boiler shutdown (not in mini-Vivaldi)

project

By installing a single-board computer (Raspberry Pi) into the Vivaldi is realized with a clock timer with unlimited switching.

As an additional feature the Vivaldi is wireless capability and can be switched off via PC / tablet and smartphone and. In addition, the timer can be programmed web-based. By means of a relay is simulated by the Raspberry only the time you press the power button. The material costs are about 65,- US$.

Functions

• Programming the (mini) Vivaldi a Webinterfache
• Unlimited number of timers to activate / deactivate the machine (daily, weekly, individually (de-) activated) (with / without Boiler in the non-mini)
• Switching on / off via web interface with popular browsers (eg with a smartphone of The Move)
• The non-Mini can be switched on with / without boiler via the GUI optional
• Power on / off by building control via Web Interface
• Automatic and manual shot Timer
• Shot administration (database with comment and favorites function) (Shots under 8 seconds are not saved)
• The shot database can be adjusted by pressing a button (all uncommented entries without Favourite Flag and without touch)
• per shift timing programmable boiler shutdown (Not for mini Vivaldi)
• automatic load detection can be switched off (manual reference)
• backflush
• electricity meter incl. electricity cost calculator
• User management with authorisation concept
• configuration completely possible through the graphical interface
• phpMyAdmin can be used for data migration
• configuration of WLAN on Windows directly to the SD card possible
• interface for home automatisation
• integrated printserver with airprint

Screenshots

The surface is available from the PC / tablet or smartphone via browser.

The timer includes manual on / off and change the dosage.

shot timer / shot administrative

User management

configuration Datei:VivaldiMyTimer Settings .png

Security note

The tasks described here may only be carried out by competent persons. When working on high voltage (120V/230V) can be deadly. Moreover, in case of errors the machine may be damaged.

Disclaimer

This description portrays the rebuilding my machine. There is no guarantee that errors have crept. For this reason, should not be taken 1 to 1 all. It is intended primarily to be able to understand the work and to pay an own conversion without this description. I am not responsible for any damage! This description is an initial draft. It would be glad if someone would check the description is correct. Suggestions, corrections and additional photos are welcome.

The material

The Raspberry PI (Rev. 2), a housing, a 4GB SD card, a WLAN stick, an AC adapter and an extension to the Vivaldi a socket for the power adapter. Who grows the Raspberry externally, can also operate with a standard electrical outlet.

Note: The Raspberry PI (Rev. 2) is not 100% compatible with the Rev. 1. Due to the modified connector strip is not running the software provided correct.

Raspberry PI B + is pin-compatible and can therefore be used.

VivaldiMyTimer Datei:Raspberry.png

The cable and a relay.

VivaldiMyTimer Datei:Kabel.png

The components there are largely Reichelt: Here the cart

Then we do not need the relay board with one or two relays. Here helps ebay search for "relays Raspberry". Screw on both sides avoid soldering.

For option 2, a current meter is required. These helps ebay following search continues, "electricity meter S0". There are models with different pulses per kW. The higher the value, the more accurate the count. 1000 pulses are but adequate. The software

The software is available here (2-3GB): Download

Currently a password will be needed to unpack.

The password enables it via PM after downloading. For this I need the user from the network or from coffee S1Cafe. In both of these forums I support bar. On other mail address I will send no messages.

German support is provided here: [1]

English support page is here: [2]

Here is an example of the surface through the browser is an iPhone called:

VivaldyMytimer Datei:Iphone.png Installation

In my Vivaldi I have the Raspberry inserted into the machine. For reason of the temperatures in the machine I can only recommend in insulated tanks but this. For uninsulated kettles I recommend to put back to the Vivaldi the Raspberry. But if the machine is open anyway, an insulation with Armaflex is done but also fast.

1. First, the machine must be opened:

VivaldiMyTimer Datei:Offen.jpg

2. Connect the cable from the control unit to control electronics should be made ​​clear so that the control electronics can be pulled to the rear:

VivaldiMyTimer Datei:Offen2.jpg

VivaldiMyTimer Datei:Offen3.jpg

3. The plugs should be labeled so that they too will find the right place on the control electronics.

VivaldiMyTimer Datei:Blackbox.jpg

4. Open the box of the control electronics:

VivaldiMyTimer Datei:Elektronik.jpg

5. By means of an adapter cable, we dress the necessary pins out. Important here is the direction of the markings. The nose of the female connector and the recess of the plug strip facing upwards!

VivaldiMyTimer Datei:Adapter1.jpg

VivaldiMyTimer Datei:Adapter2.jpg

. 6 We need only the veins 1 (red) and 11 for the relay on / off. For the "backwash" option we need the wires 2 and 7 (7 is the double reference, 2 and 5 (single reference) would go). For the "Boilerabschakltung" option we need the wires 2 and 9. FIG.

All other we remove. The two veins we are stuck in a shrink tube.

VivaldiMyTimer Datei:Adapter3.jpg

VivaldiMyTimer Datei:Adapter4.jpg

7. Insert adapter cable.

VivaldiMyTimer Datei:Adapter5.jpg

8. Option 1:

Preparing for automatic load detection (only necessary if this function is desired)

For this purpose, the plug next to the ribbon cable is severed and lengthened the green wire, so that it can be connected later on our relays:

VivaldiMyTimer Datei:Dose.jpg

9. Now the cable between relay and Raspberry is assembled. I chose solder connections. But there are also a number of relays with screw manufacturers. So then no soldering would be necessary during the conversion.

On the relay boards, the connections are usually labeled well.

On Raspberry we use the following pins:

For the timer

Raspberry Pin2 (+ 5V) ---> VCC relays Raspberry Pin 14 (ground) ---> relays GND Raspberry Pin 15 (Gpio22) ---> relays

Option 1: Switching automatic load / reference manual

This option is recommended. We only need another artery and a relay board with two relay only costs about 1, - EUR more than the board with only one relay.

Raspberry Pin 16 (Gpio23) ---> Relay2 IN

Option 2: Energy Meter

As a second function, a power meter to be installed. It sends each consumed kWh depending on the model 1000 or 2000 pulses to the Raspberry. These pulses we can evaluate and let the consumption and the kWh-price costs Show. For the meter about 20, - EUR

Raspberry Pin 5 (Gpio03) ---> meter S0 + Raspberry pin 6 (ground) ---> meter S0 -

Option 3:. Shot Timer Shot VAT administration

A relay in parallel with the solenoid valve provides us with the necessary contact.

PINs: Raspberry Pin 3 (Gpio02) ---> RELAY5 closers Raspberry pin 6 (ground) ---> RELAY5 NO (PIN same as in option 2)

Option 4: Rückspülautomatik

Raspberry Pin2 (+ 5V) ---> Relay3 VCC Raspberry Pin 14 (ground) ---> GND Relay3 Raspberry Pin 18 (Gpio24) ---> Relay3 IN

The contact of the relay goes to the control panel wires 2 and 7. FIG.

Option 5: Boiler shutdown

Raspberry Pin2 (+ 5V) ---> Relay4 VCC Raspberry Pin 14 (ground) ---> GND Relay4 Raspberry Pin 22 (GPIO25) ---> Relay4 IN

The contact of the relay goes to the control panel wires 2 and 9. FIG.

10. For the cables we need a recess on the housing. I have this extended directly to the female RCA connector and then pulled through the cable.

VivaldiMyTimer Datei:Gehaeuse1.jpg

VivaldiMyTimer Datei:Gehaeuse2.jpg

11. The sealed casing can be protected with an insulating anything against any moisture. (Due to the many holes on the chassis that's more of an alibi work;))

VivaldiMyTimer Datei:Gehaeuse3.jpg

12. Connection of the relay board

GPIO22 turns the machine on and off.

The two cables from the adapter cable to the control unit come on normally.

GPIO23 switches the automatic load.

The two extended cores of the green terminal come on the opener.

The connection diagram can be seen in the photo below the veins.

VivaldiMyTimer Datei:Relais1.jpg

Here is a photo of the not connected relays.

Who renounces the option 1 (automatic load detection) of course has only one relay.

Anyone who uses three relays, is prepared for the coming option "automatic cleaning program".

VivaldiMyTimer Datei:Relais2.jpg

13. The completed attached relay should be protected against short circuits, as we put it in with the casing of the control electronics. I have used a shrink tube. Wrap with electrical tape should also rich.

VivaldiMyTimer Datei:Relais3.jpg

14. Here there is still space for our relays. Now the housing of the control unit can be closed again.

VivaldiMyTimer Datei:Relais4.jpg

15. Now only missing the Stomanschluß for our Raspberry. For this we cut out the extension simply the clutch off and connect it to the power cord of Vivaldi.

VivaldiMyTimer Datei:Strom1.jpg

16. Option 2: electricity meter (only if necessary)

Now can also be installed easily the electricity meter. Just the power cord of Vivaldi pull something into the machine until it reaches to the cup warmer.

VivaldiMyTimer Datei:Strom2.jpg

The cables at the top of separation and use the electricity meter.

L is the brown wire direction outlet. N the blue wire towards outlet.

The outputs are labeled accordingly.

S0 + goes to Raspberry Pin5 (GPIO3). S0 + goes to Raspberry Pin6 (mass).

If the electricity meter as a display my have, so must not be visible, as we read the values ​​on the Raspberry.

VivaldiMyTimer Datei:Stromzaehler.jpg

17. Option 3: Shot Timer (only if desired)

We engage the shot timer from the relay for the solenoid valve. Obtain Due to the size and a potential free contact, I have used a reed relay with built-in freewheeling diode.

The solder points on which we can solder the relay we see in the following image. !! Caution !! Unfortunately, the cores (+/-) are reversed on the photo. After correction I forgot to make a new image.

Shot Timer Datei:Platine.JPG

And here the used reed relays. That there are also favorable at Reichelt (SIL No. 7271-D 12V). The designation reads: SA12-1A72-71D

Shot Timer Datei:Reedrelais.JPG

18. Now everything can be reassembled. The Raspberry I tucked in my top of the cup warmer. The SD card is facing up, so I can easily make a firmware change. With cable ties of the ammeter and the Raspberry can be fixed.

VivaldiMyTimer Datei:Einbauort.jpg

19th Now we need the software. The Image I'll put here on the board are available. Link follows.

With the tool "Win32 Disk Imager" it is written to the SD card. Then plug in the Raspberry and connect via cable to the network.

Now the plug into the socket of Vivaldi.

After 2 minutes, the web interface should be under http: // Vivaldi / be accessible.

The login is: viv Password: viv

Now a test of the correct wiring of the relay can be carried out.

20. In the "Settings" menu, which is accessible through the gear icon at the bottom right, the system settings can be made.

Here, the SSID and the WAP-Key of the WLAN network is entered. Then the power plug (power) must be taken shortly and the LAN cables are pulled. Insert power plug.

After 2 minutes, the web interface should be accessible via WLAN.

Note: Probably only works WPA2.

Possibly there are also some special characters in the WPA Key problems.

If everything works you have done it and the housing can be closed. Others

Powered by Webaufruf

Here the possibility the Vivaldi to switch directly over Webaufruf. This can be used for various automation. eg FHEM

Switching on: http: // username: password@vivaldi/gpio_on.php Off: http: // username: password@vivaldi/gpio_off.php

Time Zone

A hint for my non German users: You will have a timezone problem, Because The image is configured to German timezone. It is easy to change this via console:

To change timezone, please use the program Putty to enter the shell of the raspberry. User: pi Password: Vivaldi

Use "sudo Raspi-config" to change timezone.